Infinitely variable drive Pneumatic sieve clamping (option)
Low-noise blower (option)
With the sieving machine SM 35 nearly all bulk materials can be separated and sorted out. It is a solid, stable machine, which can be used without any problem for robust labour assignments. The selection takes place as a matter of the difference principle, that means that the materials to be sieved will be separated according to size.
The main use of the sieving machine is in automatic lathe companies, where turned parts are separated from chips. But also in other industries where punched parts are separated from waste or burnishing and deburring stones from work-pieces, this technique has proved truly.
Normally the loading of the sieve is metered with a hopper. It is equipped at its lower side with a metering flap making loading infinitely variable. The sieve underneath is equipped with an infinitely variable drive, which moves it in vibration with constant amplitude. The movement is divided by the fixing up of the sieve into a horizontal and a vertical component. The relation of these two components can be changed threefold. Together with the sieve declining equipment it is therefore always possible to find the best adjustment for the materials to be sieved.
The sieving machine SM 35 can be delivered with a blower at option. It is mounted on the blower tunnel, where the woolen chips are blown into the chip container, while the work-pieces themselves slide into the part container.		 The operator can also take away bigger chip-balls and throw them manually in one of the two exits on each side. As the sieving machine SM 35 can either be filled charge by charge or continuously, it is perfectly constructed for fully automatic installations for mass hardware, for example interlinked with loading lift or automatic centrifuge.

Technical Equipment

– solid machine body with integrated blower tunnel and stable feet

– frame of vibration with special suspension to regulate the vertical course and the inclination of the sieve

– infinitely variable eccentric drive

– sieve clamping by an easy changing system or as an option pneumatic clamping

– sieveframe made of beech-wood with steel wire mesh

– protection in stainless steel for sieveframe, option

– blower to be regulated by electronic, option

– on/off security-switch

– different accessories as option
Technical data
surface of sieves 0,35 m²
oscillatory frame fitting to sieve dimensions 982x385x100 mm³
constant course of sieving 7 mm
variable oscillatory frequency 600-1200 Hz
regulation of the vertical course
(in connection with the course horizontal)		 4:1
power 0,37 kW
working voltage 230/400 VAC
weight without hopper and sieve 145 kg
filling volume of standard hopper 70 ltr
volume of air of the blower can be regulated ca. 100-700 m³/min
difference of presure bis 890 Pa
power of blower 0,30 kW
working voltage 230 VAC
sound level 74 dB(A)
Insert standard sieves made of NIA-steel;
wire mesh DIN/ISO 4783/3; available widths:
1,0; 1,6; 2,0; 2,5; 3,15; 4,0; 5,0; 6,3; 8,0; 10,0; 12,5; 15,0; 16,0; 20,0; 25,0; 31,5; 40,0
Other dimensions or sieves in hole or slotted sheet to order.